Arizona All Nissan Club

Buy / Sell => Buy / Sell => Topic started by: AZ-Ted on December 27, 2013, 06:05:58 PM

Title: F/S Tube Bumper - 2nd Gen Xterra
Post by: AZ-Ted on December 27, 2013, 06:05:58 PM
Hey everyone, my friend Aaron (Penski61) is building a tube bumper for the 2nd Gen Xterra.  This is for an Xterra without a body lift.  Asking price will be $800.

Here are a few pictures of his progress so far.  He borrowed Andrew's truck for the build.

(http://i190.photobucket.com/albums/z219/penski61/work/P1010457_zpsf414438e.jpg)

(http://i190.photobucket.com/albums/z219/penski61/work/P1010458_zpsb89abeb1.jpg)

If you are interested, please let me know, and I'll get you in contact with Aaron.  The final build will be done on your X, so that any customizations can be done to suit your needs.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: Hammer (Avi) on December 31, 2013, 02:19:42 AM
Nice looking bumper. 
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: AZ-Ted on February 17, 2014, 06:50:09 PM
The one above has been sold.  But Aaron is in the process of making another one using my truck for a template.  This one will be for a 2" body lift, and it will fit all 2nd Gens.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: AZ-Ted on February 17, 2014, 06:51:25 PM
Here is a pic of the bumper so far

(http://i190.photobucket.com/albums/z219/penski61/P1010517_zps5083ce89.jpg)

Let me know if you are interested, and I'll get you in contact with Aaron.


.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: remo1991(Brent) on February 18, 2014, 05:48:19 PM
Hay Ted is bumper good for a winch? That's your truck right? Sweet stance!! I need the TS!! Ted would you mind helping on getting list of parts I need. I found a totaled Titan and need to know the parts I need from it.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: AZ-Ted on February 18, 2014, 10:28:06 PM
Yes, this bumper will have a winch mount and recovery points, as well as a removable front skid.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: sunny1881 on February 18, 2014, 11:17:24 PM
Here you go Brent: http://www.thenewx.org/forum/showthread.php?t=46048
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: m.sainz12 on April 03, 2014, 12:29:07 PM
Does he do rear bumpers?
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: Jo-BOB on June 11, 2014, 04:04:23 PM
I second the question about doing rear bumpers. Also, what about sliders?
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: AZ-Ted on December 02, 2014, 04:07:52 PM
I second the question about doing rear bumpers. Also, what about sliders?

He only made a few front bumpers, but no rears  (other than the rear tire carriers for his own personal vehicles.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: AZ-Ted on December 02, 2014, 04:09:53 PM
Here is a pic of the bumper so far

(http://i190.photobucket.com/albums/z219/penski61/P1010517_zps5083ce89.jpg)

Let me know if you are interested, and I'll get you in contact with Aaron.


.

Just talked to Aaron.  He is willing to sell this, as is, for $250.  It would need some finish welding, and potentially some minor adjustments to the mounts, as apparently, my truck is not 100% straight (quite a bit of offroad use).
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: PitSnipe (Kyle) on December 02, 2014, 07:34:13 PM
Damn, that's a smoking deal. Too bad its the holiday season and funds are so tight.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: pinchel (Rob) on December 02, 2014, 10:13:01 PM
Damn, that's a smoking deal. Too bad its the holiday season and funds are so tight.

Too bad it's not gonna fit a 1st gen and funds are tight. :)
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: Jo-BOB on December 21, 2014, 11:09:58 AM
Is there any reason why he doesnt want to finish it?

Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: AZ-Ted on December 21, 2014, 06:09:57 PM
IDK.  You could PM him on thenewx.  His screen name is Penski61.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: Xtracrispy on December 21, 2014, 06:21:57 PM
Good deal. too bad I don't have a body lift.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: PitSnipe (Kyle) on March 14, 2015, 11:34:49 AM
Hey Ted, does he still have the bumper? I am a little bit more curious now. I would need a body lift I guess to make it work.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: AZ-Ted on March 14, 2015, 02:39:24 PM
Hey Ted, does he still have the bumper? I am a little bit more curious now. I would need a body lift I guess to make it work.

Yes, Aaron still has it.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: FirstXRS (Zac) on March 14, 2015, 11:24:35 PM
As I said on NewX, if I knew how to weld and had the equipment, I'd be all over this.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: Jo-BOB on September 09, 2015, 08:23:26 AM
Hey Ted, does he still have the bumper? I am a little bit more curious now. I would need a body lift I guess to make it work.

Yes, Aaron still has it.

Hey ted if your in touch with Aaron could you let him know I'm interested in the bumper. I may know someone who can finish the job and make it work, but I want to see it first and so does the fabricator.

I sent him a pm via thenewx, but havent heard anything from him.
Title: Re: F/S Tube Bumper - 2nd Gen Xterra
Post by: PitSnipe (Kyle) on January 31, 2016, 05:41:44 PM
Hey Ted, the pics are no longer good in the OP. Does he still have the bumper?