Arizona All Nissan Club

Club Garage => Xterra Garage => Topic started by: AZ Prospector on January 17, 2017, 08:24:44 AM

Title: Question about lift and skid plate
Post by: AZ Prospector on January 17, 2017, 08:24:44 AM
So i am upgrading 2013 pro4x suspension to OME and I was wondering if the 1.5" lift will impact the radiator skid plate?  I know the stock skid isn't much, but I do like the extra protection from road debris. 
Title: Re: Question about lift and skid plate
Post by: Chuy on January 17, 2017, 08:39:41 AM
So i am upgrading 2013 pro4x suspension to OME and I was wondering if the 1.5" lift will impact the radiator skid plate?  I know the stock skid isn't much, but I do like the extra protection from road debris.

Not at all, only if you do a Body lift. There is no change in the frame relation to the body/bumpers when doing a suspension lift.
Title: Re: Question about lift and skid plate
Post by: AZ Prospector on January 17, 2017, 06:16:11 PM
Thank you. FYI, slow down and air down on those wash board roads. So far I have had both engine mounts, body mount and control arms replaced. All but the body mount have been covered under extended warranty. 

Also, is anyone in need of the pro4x 2013 suspension?  I believe all is good except for the rear leaking shocks.  If so, let me know otherwise going in the dumpster.
Title: Re: Question about lift and skid plate
Post by: AZGeorge on January 18, 2017, 07:21:10 AM
Also, is anyone in need of the pro4x 2013 suspension?  I believe all is good except for the rear leaking shocks.  If so, let me know otherwise going in the dumpster.


Post it in the for sale section.  Also on Facebook.  I sent some weird parts to better places than the landfill this way.
Title: Re: Question about lift and skid plate
Post by: baronjon on March 13, 2017, 04:41:41 AM
You might want to upgrade your tires as well since you got a lift kit.
Title: Re: Question about lift and skid plate
Post by: Rubio480 on March 13, 2017, 12:14:48 PM
Ill take the suspension parts if its freeeee