Arizona All Nissan Club

Club Garage => Xterra Garage => Topic started by: Hubcap on June 04, 2017, 05:14:46 PM

Title: Just bought it
Post by: Hubcap on June 04, 2017, 05:14:46 PM
2011 S. Cant wait to start the mods.
Title: Re: Just bought it
Post by: Thatsgr8 (Scott) on June 04, 2017, 05:35:25 PM
Sweet ride.


Sent from my iPhone using Tapatalk
Title: Re: Just bought it
Post by: Thupertrooper (Victor) on June 04, 2017, 06:26:33 PM
Very nice  8)

What you have planned first?
Title: Re: Just bought it
Post by: Hubcap on June 04, 2017, 07:59:06 PM
Was thinking about this...but I keep hearing about spring bucket hitting the UCA. Need to do more research.
 
http://www.roughcountry.com/nissan-suspension-lift-kit-867.html?gclid=CO_VsILZpdQCFUWUfgodMFEAkw

Going to upgrade the stereo to a nice double din unit.
Title: Re: Just bought it
Post by: Thupertrooper (Victor) on June 04, 2017, 09:17:45 PM
Yea CBC is what limits it.
Maybe some spc UCAs would help.
There are other brands like total chaos,prg
Title: Re: Just bought it
Post by: Hubcap on June 04, 2017, 09:21:25 PM
I don't need to go really high just high enough to do 285's if I decide to... I'd like it to sit level more than anything.
Title: Re: Just bought it
Post by: DBAX on June 05, 2017, 07:35:56 AM
I marked off the contact points at full droop w/ PRG UCAs and cut away the issue area. No more droop/contact issues..
Title: Re: Just bought it
Post by: Hubcap on August 07, 2017, 09:11:05 PM
I marked off the contact points at full droop w/ PRG UCAs and cut away the issue area. No more droop/contact issues..


Was this hard to do? Did you use a grinder?
I think this is what i'll do until i can save up my lunch to buy the uca's

Just ordered 2" spacers and aal...got the cam bilts too.
Title: Re: Just bought it
Post by: DBAX on August 08, 2017, 07:56:20 AM
Not hard at all really, just let it drop and mark the line w/ a sharpie then go to work. Yes, a cutting wheel, then grinder to smooth it down. Shot it w/ some black rustoleum and they're good to go. Over 75k miles and no stress or tearing issues in the bucket tops.
Title: Re: Just bought it
Post by: Hubcap on August 08, 2017, 08:33:04 PM
Thanks. I think ill give this a try.