collapse

Donate

Become a 2017/18 AZXC Supporting Member just Click the Donate button.

* Calendar

November 2017
Sun Mon Tue Wed Thu Fri Sat
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 [18]
19 20 21 22 23 24 25
26 27 28 29 30

No calendar events were found.

Upcoming Events

* Newest Member

* Who's Online

  • Dot Guests: 14
  • Dot Hidden: 0
  • Dot Users: 0

There aren't any users online.

* User Info

 
 
Welcome, Guest. Please login or register.
goto AZXC

Go To AZXC

goto AZTC

GoTo AZFC

GoTo AZPC

Forum Chatbox

Refresh History
  • pinchel (Rob): New Club patches are coming soon...pics just posted! Who wants some?! [link]
    Yesterday at 06:37:09 PM
  • pinchel (Rob): There's a few members in Tucson, but not sure what their availability is.
    Yesterday at 10:44:00 AM
  • cjohan: anyone in tucson? need to do the bypass but would rather have help then do it myself
    November 15, 2017, 07:43:18 PM
  • HBIII: Thanks, I will check them out
    November 12, 2017, 02:40:02 PM
  • Thupertrooper (Victor): Phx rack and axle has lifetime replacement on there rack and pinions.
    November 12, 2017, 10:44:55 AM
  • pinchel (Rob): Sounds like your replacement rack was bad.
    November 12, 2017, 08:28:27 AM
  • HBIII: The assembly is leaking in both sides and the boots on the inner tie rods are both ripped open leading them to believe it is all related. Sorry I'm not the best with suspension knowledge
    November 10, 2017, 03:14:54 PM
  • cjohan: inner tie rods?
    November 10, 2017, 02:18:28 PM
  • HBIII: Inner tie rods
    November 10, 2017, 02:11:18 PM
  • PitSnipe (Kyle): fans are controlled by the coolant temp. When coolant temp is above specified temp the fans will come on.
    November 10, 2017, 01:36:02 PM
  • cjohan: anyone have there fans come on with engine? a/c and heat off
    November 10, 2017, 01:19:49 PM
  • PitSnipe (Kyle): where exactly did it fail?
    November 10, 2017, 12:48:52 PM
  • HBIII: The factory rack failed at 48k miles and now the replacement just failed at 71k miles and I don't know why
    November 10, 2017, 06:41:15 AM
  • PitSnipe (Kyle): Elaborate "eat steering assembly"
    November 10, 2017, 03:53:49 AM
  • HBIII: Preferably in the valley. Thanks
    November 10, 2017, 12:21:39 AM
  • HBIII: Anyone have recommendation for someone that can diagnose an issue causing my X to eat steering assemblies?
    November 10, 2017, 12:20:59 AM
  • Forrest: Charouleau gap is a fun but difficult trail I try to go up there once a month
    November 09, 2017, 07:46:05 AM
  • 14Frontier: I have been up to kiss rock on the gap
    November 07, 2017, 05:37:40 PM
  • remo1991(Brent): Yup fun trail
    November 05, 2017, 07:00:20 AM
  • m.sainz12: anyone ever run charouleau gap in tucson?
    November 05, 2017, 06:49:07 AM

Author Topic: Xterra torque specs  (Read 9567 times)

0 Members and 1 Guest are viewing this topic.

Offline Hammer (Avi)

  • Club President
  • Administrator
  • Hero Member
  • *****
  • Posts: 1841
  • Gender: Male
Xterra torque specs
« on: August 07, 2013, 12:18:35 AM »
I can not guarantee these to be correct, use at your own risk.  

Front Suspension:
Swaybar Mounting Brackets: 96 ft-lbs [FSU-5]
Swaybar Connecting Rod (Both Ends): 62 ft-lbs (Replace After Removal) [FSU-5]
LCA Bump Stop: 14 ft-lbs [FSU-5]
LCA Cam Bolt: 100 ft-lbs [FSU-5]
LCA Ball Joint Nut: 70 ft-lbs (Replace After Removal) [FSU-5]
UCA Mount Bolt: 94 ft-lbs [FSU-5]
UCA Ball Joint Nut: 58 ft-lbs (Replace Cotter Pin After Removal) [FSU-5]
Lower Shock Mount: 155 ft-lbs [FSU-5]
Upper Shock Mount Nuts: 22 ft-lbs (there are 3 nuts) [FSU-5]
Shock Upper Spring Seat Nut: 30 ft-lbs (Replace After Removal) [FSU-5]
Wheel Hub Mounting Bolts: 44 ft-lbs (there are 4 bolts) (Replace After Removal) [FAX-5]
Center Hub Nut: 101 ft-lbs (Replace Cotter Pin After Removal) [FSU-5]


Rear Suspension:
Bump Stop: 14 ft-lbs [RSU-5]
Swaybar Mount: 36 ft-lbs [RSU-5]
Swaybar Connecting Rod Nuts: 32 ft-lbs (Replace After Removal) [RSU-5]
Upper Shock Mount Nut: 33 ft-lbs (Replace After Removal) [RSU-5]
Lower Shock Mount: 148 ft-lbs [RSU-5]
Spring Shackle: 77 ft-lbs (Both upper and lower) [RSU-5]
Front Leaf Spring Mount Bolt: 84 ft-lbs (Replace After Removal) [RSU-5]
Axle U-Bolt Nuts: 53 ft-lbs (Replace After Removal) [RSU-5]
Dynamic Dampener (weight): 14 ft-lbs


Front Diff (R180):
Diff Mounting Bolts: 135 ft-lbs [FFD-14]
Crossmember Bolts: 96 ft-lbs [FFD-14]
Pinion Nut: 138-216 ft-lbs (Replace After Removal) [FFD-16]
Ring Gear Bolts: 43 ft-lbs [FFD-16]
Carrier Bearing Journal: 69 ft-lbs [FFD-16]
Diff Cover Bolts: 30 ft-lbs [FFD-16]


Rear Diff (C200):
Pinion Nut: 107-238 ft-lbs (Replace After Removal) [RFD-15]
Ring Gear Bolts: 58 ft-lbs [RFD-15]
Carrier Bearing Journal: 69 ft-lbs [RFD-15]
Axle Bearing/Hub Nuts: 49 ft-lbs (there are 4 nuts) [RAX-7]
Diff Cover Bolts: 36 ft-lbs [RFD-15]


Rear Diff (M225 w/o Locker):
Pinion Nut: 220-500 ft-lbs (Replace After Removal) [RFD-50]
Ring Gear Bolts: 133 ft-lbs (Replace After Removal) [RFD-50]
Carrier Bearing Journal: 80 ft-lbs [RFD-50]
Axle Bearing/Hub Nuts: 89 ft-lbs (there are 4 nuts) [RFD-50]
Diff Breather: 31 in-lbs [RFD-50]
Diff Cover Bolts: 31 ft-lbs


Rear Diff (M225 w/ Locker):
Pinion Nut: 220-500 ft-lbs (Replace After Removal) [RFD-123]
Ring Gear Bolts: 135 ft-lbs (Replace After Removal) [RFD-123]
Carrier Bearing Journal: 80 ft-lbs [RFD-123]
Axle Bearing/Hub Nuts: 87 ft-lbs (there are 4 nuts) [RFD-123]
Diff Breather: 31 in-lbs [RFD-123]
Locker Wire Harness: 89 in-lbs [RFD-123]
Diff Cover Bolts: 31 ft-lbs [RFD-123]


Front Driveshaft:
Flange Nut: 44 ft-lbs (Replace After Removal) [PR-5]


Rear Driveshaft (Model 2S1330):
Flange Nut: 71 ft-lbs (Replace After Removal) [PR-10]


Rear Driveshaft (Model 2S1330-BJ100):
Flange Nut: 41 ft-lbs (Replace After Removal) [PR-11]


Front Brakes:
Slide Pin Bolt: 32 ft-lbs [BR-22]
Torque Member Bolt: 136 ft-lbs [BR-22]
Union Bolt: 24 ft-lbs [BR-22]
Bleed Valve: 69 in-lbs [BR-22]


Rear Brakes:
Slide Pin Bolt: 19 ft-lbs [BR-28]
Torque Member Bolt: 76 ft-lbs [BR-28]
Brake Line: 19 ft-lbs [BR-28]
Bleed Valve: 69 in-lbs [BR-22]


Maintenance:
Engine Oil Drain Plug: 25 ft-lbs (Replace Crush Washer)

Transfer Case Fill Plug: 26 ft-lbs (Replace Gasket)
Transfer Case Drain Plug: 26 ft-lbs (Replace Gasket)

Front Differential Fill Plug: 25 ft-lbs (Replace Gasket)
Front Differential Drain Plug: 25 ft-lbs (Replace Gasket)

Rear Differential Fill Plug (C200): 36 ft-lbs (Apply Silicon RTV or Equal)
Rear Differential Drain Plug (C200): 36 ft-lbs (Replace Gasket)

Rear Differential Fill Plug (M226) (with or without Locker): 25 ft-lbs (Apply Silicon RTV or Equal)
Rear Differential Drain Plug (M226) (with or without Locker): 20 ft-lbs (Apply Silicon RTV or Equal)

Manual Transmission Fill Plug: 25 ft-lbs (Replace Gasket)
Manual Transmission Drain Plug: 25 ft-lbs (Replace Gasket)

Automatic Transmission Drain Plug: 25 ft-lbs (Replace Gasket) (both 2wd and 4wd models)

Engine:
Intake Manifold: Bolts: First Pass: 5 ft-lb Second Pass: 21 ft-lb
Intake Manifold: Studs: 8 ft-lb (If removed from Engine Block)
Intake Manifold: Bolt Pattern: Engine Front: 5, 3, 2, 7
Intake Manifold: Bolt Pattern: Engine Front: 8, 1, 4, 6

Misc:
Wheel Lug Nuts: 98 ft-lbs
PRG Advanced lift
Xoskel Sliders and Roof Rack
Full skids