General Discussion > How To / DIY

What's in your tool box?

(1/5) > >>

pinchel (Rob):
List tools that you've used on your Xterra and we'll make one big list in the original post.

Uncommon:
32mm is the axle shaft, must have.  I must have 2 or 3 of these sets lying around, haven't broken one yet.  http://www.harborfreight.com/13-pc-12-in-drive-metric-impact-deep-wall-socket-set-69279.html
27mm socket
24mm socket
22mm socket

Frequently used:
19mm socket
17mm socket
14mm socket
10mm socket
6mm Allen wrench

Hammer
BFH (Bigger Hammer 3-5lb)
Torque Wrench
1/2" Breaker Bar
Open end wrenches

Ratcheting Box Wrenches 10mm, 14mm, 17mm, 19mm
Pass thru socket wrench
Copper Anti Seize
4 1/2" Grinder
Cordless Drill Gun / Impact

Specialty Uncommon:
JB Weld
Kano Kroil
Propane Torch
Step-Up Drill
Pickle fork
Ball joint removal tool
WD40
Penetrating Fluid
Extractor sockets/removal tools
Brake Line Power Bleeder
19/21 Combo Thin Deep Wall Socket
Carbide De-burring Bits

AZGeorge:
17mm socket

Rubio480:
Sockets from  6mm to 33mm (1/4 3/8 1/2)
Open end wrenches, ratcheting wrenches etc.
Pass thru socket wrench.
Torque wrench.
Misc fluids and oils.
Misc parts.

Thupertrooper (Victor):
Hammer
Bigger hammer

pinchel (Rob):

--- Quote from: Rubio480 on August 16, 2016, 05:06:09 PM ---Sockets from  6mm to 33mm (1/4 3/8 1/2)
Open end wrenches, ratcheting wrenches etc.
Pass thru socket wrench.
Torque wrench.
Misc fluids and oils.
Misc parts.

--- End quote ---

What have you used a 33mm socket for?!

Navigation

[0] Message Index

[#] Next page

Go to full version