What's in your tool box?

[pinchel (Rob)]

List tools that you've used on your Xterra and we'll make one big list in the original post.

Uncommon:
32mm is the axle shaft, must have.  I must have 2 or 3 of these sets lying around, haven't broken one yet.  http://www.harborfreight.com/13-pc-12-in-drive-metric-impact-deep-wall-socket-set-69279.html
27mm socket
24mm socket
22mm socket

Frequently used:
19mm socket
17mm socket
14mm socket
10mm socket
6mm Allen wrench

Hammer
BFH (Bigger Hammer 3-5lb)
Torque Wrench
1/2" Breaker Bar
Open end wrenches

Ratcheting Box Wrenches 10mm, 14mm, 17mm, 19mm
Pass thru socket wrench
Copper Anti Seize
4 1/2" Grinder
Cordless Drill Gun / Impact

Specialty Uncommon:
JB Weld
Kano Kroil
Propane Torch
Step-Up Drill
Pickle fork
Ball joint removal tool
WD40
Penetrating Fluid
Extractor sockets/removal tools
Brake Line Power Bleeder
19/21 Combo Thin Deep Wall Socket
Carbide De-burring Bits

[AZGeorge]

17mm socket

[Rubio480]

Sockets from  6mm to 33mm (1/4 3/8 1/2)
Open end wrenches, ratcheting wrenches etc.
Pass thru socket wrench.
Torque wrench.
Misc fluids and oils.
Misc parts.

[Thupertrooper (Victor)]

Hammer
Bigger hammer

[pinchel (Rob)]

Sockets from  6mm to 33mm (1/4 3/8 1/2)
Open end wrenches, ratcheting wrenches etc.
Pass thru socket wrench.
Torque wrench.
Misc fluids and oils.
Misc parts.

What have you used a 33mm socket for?!

[Chuy]

I just started using this penetrating oil called Kroil. It works like magic better than PB blaster. It has amazed me when I have a stuck bolt. I still use a ton of PB blaster, and I also started using anti-seize a lot more.

Uncommon:
Kano Kroil
Propane Torch
Step-Up drill

Frequently used:
PB Blaster
Copper Anti Seize
Ratcheting Box Wrench 10mm, 14mm, 17mm, 19mm
4 1/2" Grinder
Cordless Drill Gun

Specialty Uncommon:
Brake Line Power Bleeder
19/21 combo thin deep wall socket
Carbide De-burring Bits

[Rubio480]

Sockets from  6mm to 33mm (1/4 3/8 1/2)
Open end wrenches, ratcheting wrenches etc.
Pass thru socket wrench.
Torque wrench.
Misc fluids and oils.
Misc parts.

What have you used a 33mm socket for?!

Lol, had to buy it while working on my rear diff. It was the nut for the pinion

[Thupertrooper (Victor)]

I have tap and die set for our 2nd gen style trucks was missing lug nut die but have thAt now.
Ill post up the acutal sizes when i get home.

[Chuy]

I have tap and die set for our 2nd gen style trucks was missing lug nut die but have thAt now.
Ill post up the acutal sizes when i get home.

I need one of the for the rear bumper holes, what's a good brand and set to get that matches our trcuks?

[Thupertrooper (Victor)]

Just depends on how much you want to spend. I got mine through amazon just because i need it overnight delivery thanks to prime.
You can barrow mine no need to buy when you just need it for that. I used mine for the cv axle and nut.

[Hammer (Avi)]

32mm is the axle shaft, must have.  I must have 2 or 3 of these sets lying around, haven't broken one yet.  http://www.harborfreight.com/13-pc-12-in-drive-metric-impact-deep-wall-socket-set-69279.html

[Chuy]

Just depends on how much you want to spend. I got mine through amazon just because i need it overnight delivery thanks to prime.
You can barrow mine no need to buy when you just need it for that. I used mine for the cv axle and nut.

Im just not sure what size set and pitch I need.

[Thupertrooper (Victor)]

If some one wants to copy these

[Thupertrooper (Victor)]

Good set of small and big snap ring pliers both that open and closes.

[pinchel (Rob)]

Good set of small and big snap ring pliers both that open and closes.

Yup, I needed them when doing the LCA. I bout the universal set from HB.$5